Full bathroom features include:
- Includes an adjustable height shower with curtain
- Waterproof lining panels to all walls
- Non-slip floors, easy to clean
- Luxury, high quality finishes throughout
- Porcelain dual-flush toilet
- Vanity, basin and mirror
- Australian Standard connections to waste/sewer
- Hot and cold water inlets (on-site hot water supply or heater required)
- Rear openable window
- 240volt outlets
- Light switch
- Internal and External Electrical Distribution Board (ECBs)
- Lockable door with clothes hook, ventilation grill in a steel frame
- Wear-resistant and reinforced floor
- Plexiglass shower screen
- Exhaust fan
- Toilet roll holder
- Soap holder and towel hook
- Toilet brush and wall mounted holder
- Forklift slots for easy and safe handling
Compare bathroom and toilet models (PDF)
Specifications
- Waste Management: Features integrated flushing toilet that can connect to a waste holding tank.
- Handwashing Facilities: Includes a sink with a freshwater supply for handwashing.
- Lighting and Ventilation: An internal LED lighting system keeps everything bright and airy inside, while a ventilation fan and vent promote air circulation and odor control.
- Steel frame / Steel roof / Patterned ramp platform / Zin-rich primer with light gray power coated
- Wallboard 50 EPS foam composited wallboard with Fire protection level B2
- Roof 50 EPS foam composited wallboard with Fire protection level B2
- Floor 12 mm rigid PVC sheet + 3 mm anti-slip wear-resistant floor
- Door & Window EPS composite panel outward opening door & window
- ISO, CE Certification
Size
| L (m) |
W (m) |
H (m) |
| 2.16 |
1.92 |
2.36 |
Weight
Approximately 700kg
Electrical
- Internal, Electrical Distribution Board (EDB), fitted with 2 x 2 pole 16 amp RCD
- External, IP 66 rated, Electrical Distribution board for Mains power connection
- External EDB is fitted with 1 x 2 pole 16amp circuit breaker
- Features 3 Pin GPO, Exhaust fan, Internal ceiling Light and Light switch
Plumbing
- Water inlet and sewer connection points
- Toilet outlet centre line 75mm from ground level
- Toilet outlet Ø90mm
- Hand basin outlet Ø40mm (can be integrated with toilet outlet)
- Water inlets Ø20mm
- Water Efficiency Labelling and Standards (WELS) Compliance for all Fixtures & Fitting detailing
- WELS WATERMARK AS/NZS 6400:2016 4 Star Water efficiency
Transportable by
Crane lift points and forklift pockets
Installation
- Choose location on site.
- Install directly to mains power, sewerage and water.
- Water and waste connection services is the customer’s responsibility
- A registered plumber must provide a Form 7 after connecting the structure to mains water and sewerage
- An external hot water heater can also be added. E.g. Rinnai Efinity Electric Continuous Flow 14KW Hot Water Heater
Warranty
- Five year structural warranty
